Recommended Products
Trusted plumbing products, tools, parts, and homeowner essentials recommended by a Master Plumber.
These are a few of my go-to plumbing tools based on years of field experience. If you’re not sure which tool is right for your project, book a consultation and I’ll point you in the right direction.
RIDGID 31175 Model 2017 Telescoping Basin Wrench
A telescoping basin wrench designed to reach faucet mounting nuts behind and beneath sinks.
Master Plumber’s Note:
I use a basin wrench when faucet mounting nuts are difficult to reach with standard tools. Seat the spring-loaded jaw fully in the direction you need to turn, and avoid forcing corroded hardware that may damage the faucet or sink.
View Product
DUOYI Compression Ferrule Removal Tool
A specialty puller used to remove old compression sleeves and nuts without unnecessarily shortening the pipe.
Master Plumber’s Note:
This is useful when replacing a compression shutoff valve and the old ferrule will not come off cleanly. Inspect the exposed tubing afterward—deep scratches, corrosion, or distortion can prevent the new connection from sealing.
View Product
Channellock 426 6.5-Inch Tongue-and-Groove Pliers
Compact tongue-and-groove pliers for gripping plumbing nuts, fittings, and small components in confined spaces.
Master Plumber’s Note:
These are especially useful beneath sinks and around fixture connections where larger pliers are awkward. Set the jaws correctly, protect finished surfaces, and avoid crushing plastic nuts by overtightening.
View Product
These are plumbing parts I trust for common repairs and installations. If you’re unsure about sizing, compatibility, or the right repair, I can help you choose the correct part before you order.
SharkBite Max Push-to-Connect Ball Valve
A full-port push-to-connect ball valve for adding or replacing an accessible shutoff on compatible water piping.
Master Plumber’s Note:
Confirm the pipe material and size before ordering. Cut the pipe square, clean and deburr it, mark the required insertion depth, and test the connection under pressure before closing the work area. Available in 1/2”, 3/4”, and 1”. Select the correct size on the Amazon product page. If you’re unsure which size you need, book a consultation before ordering.
View Product
SharkBite Max 1/2-Inch Push-to-Connect Slip Coupling, UR3008A
A push-to-connect slip coupling designed to repair a damaged section of compatible 1/2-inch water pipe where movement is limited.
Master Plumber’s Note:
Measure the damaged section carefully and follow the manufacturer’s cut and insertion-depth requirements. A common mistake is removing too much pipe or failing to deburr the ends, which can damage the internal seals.
View Product
John Guest PPSV040808W 1/4-Inch Inline Ball Valve
A compact inline shutoff valve for isolating a compatible 1/4-inch refrigerator or ice-maker water line.
Master Plumber’s Note:
Confirm that your tubing is the correct 1/4-inch outside diameter before ordering. Make a clean, square cut, fully insert the tubing until it bottoms out, then pressure-test the connection before pushing the refrigerator back into place. I recommend installing an inline shutoff valve where it’s easy to reach for future service or emergencies.
View Product
Every homeowner should have a few dependable plumbing products on hand. These are some of my favorites, and if your project requires something different, I can help you choose the right solution.
Clearly Filtered Universal Inline Refrigerator Water Filter
An inline filter for compatible refrigerator ice-maker and drinking-water supply lines.
Master Plumber’s Note:
Check the tubing size, available installation space, and flow direction before ordering. Flush the filter according to its instructions, inspect every connection for leaks, and record the installation date for future replacement.
View Product
Fluidmaster 502 PerforMAX Universal 2-Inch Toilet Flapper
A replacement flapper for many toilets equipped with a standard 2-inch flush-valve opening.
Master Plumber’s Note:
Confirm that your toilet uses a standard 2-inch flapper before ordering. Clean the flush-valve seat and leave slight slack in the chain. A chain that’s too tight can hold the flapper open, waste water, and increase your water bill. If your toilet continues running after replacing the flapper, the problem may be elsewhere, and I’d be happy to help you troubleshoot it.
View Product
Fluidmaster 7110M Toilet Fill-Valve Installation and Removal Tool
A specialty tool for loosening and tightening fill-valve mounting nuts in the confined space beneath a toilet tank.
Master Plumber’s Note:
Shut off the water, drain the tank, and support the fill valve while turning the mounting nut. Do not overtighten the plastic hardware; snug it enough to seal, restore the water, and check carefully for leaks.
View Product